Consignment Error messages in MyTankInfo and their possible resolution

If you see this error in the logs:

"CGIPortal Error| detail:Permission denied for the function"

This means the 90 day period to update the user account password has passed.

Run the "Update POS Password w/Auth" event and you should be back in and pulling data!

• Related Articles

• MyTankInfo Installation - Step by Step

  Outline: 1.  Find ATG and verify it has a serial port or is connected to the store's network       a. Make sure you have the required serial cable to make the serial connection from the MyTankinfo Device to the ATG if serial       or       b.  You ...

• Incon TS-XXXX ATG Communications Specifics

  This applied to all models of Incon TS-XXXX ATGs TS-750, TS-1001, TS-2001 ***IMPORTANT NOTE *** When settings the time on these Incon ATGs, the ATG gets set to programming mode until the time and date are set, then taken out of programming mode. ...

• Omntec Specific Information on TLS350 Protocol

  Attached is the PDF for serial communications with the Omntec OEL8000III and Proteus. All OEL Models <Ctrl+a>A80       = Request Model Number OEL8000II <Ctrl+a>r02100   = Clear Alarm Log <Ctrl+a>I11100   = Alarm History Report  Proteus AKA OEL8000III ...