Popular Articles
MyTankInfo Installation - Step by Step
Outline: 1. Find ATG and verify it has a serial port or is connected to the store's network a. Make sure you have the required serial cable to make the serial connection from the MyTankinfo Device to the ATG if serial or b. You ...
Incon TS-XXXX ATG Communications Specifics
This applied to all models of Incon TS-XXXX ATGs TS-750, TS-1001, TS-2001 ***IMPORTANT NOTE *** When settings the time on these Incon ATGs, the ATG gets set to programming mode until the time and date are set, then taken out of programming mode. ...
Veeder-Root ATG Communications Specifics
Generally use default serial settings of 9600, 7 , ODD, 1 Veeder-Root Models: TLS-300 - Does not support Line Leak - Only has 1 functioning Serial port (labeled Direct) - Has been known to have that serial port blown since this model has not been ...
Navigating the RLM3 Menu
Resetting Totals on RLM3: Hit ESC until you have the DIAG-> prompt. Press S for Security Code You are given an Access Code (73) 100 minus the Access Code, then reverse the digits to get the Security Code 100 - 73 = 27, so the Security Code is 72 At ...
AutoStik Password
Autostik Communications When using USB 2 DB9 serial adapter with the new SC1x10 you will need a Null Modem Adapter installed This password will give you technician access to program the comm settings. AS<month><day> 2 digit month and day Make sure ...